Loading

 0 items
Select Your Currency
Components Categories
Categories
Home »Computer Interface » Pololu USB-to-Serial Adapter
Pololu USB-to-Serial Adapter
[391]
Item #: 276
Weight: 0.0143lbs (0.229255oz) (6.5g)
USD $15.03
  
2 In Stock
Bookmark\Share:

Pololu USB-to-Serial Adapter - Add to del.icio.us Pololu USB-to-Serial Adapter - Add to Digg Pololu USB-to-Serial Adapter - Add to Yahoo myWeb Pololu USB-to-Serial Adapter - Add to Spurl Pololu USB-to-Serial Adapter - Add to furl Pololu USB-to-Serial Adapter - Add to Ask Pololu USB-to-Serial Adapter - Add to Squidoo Pololu USB-to-Serial Adapter - Add to Simpy Pololu USB-to-Serial Adapter - Add to Reddit Pololu USB-to-Serial Adapter - Add to ma.gnolia Pololu USB-to-Serial Adapter - Share with facebook Pololu USB-to-Serial Adapter - Add to Google Bookmark

Previous Product Product 1 of 5 Nest Product
You are in Category Computer Interface

  • Use Pololu USB-to-serial adapter to connect microcontroller to a pc.
  • 3.3 V signal levels to connect directly to any microcontroller running at up to 5 V.
  • Size is less than 1.0" x 0.7" including its mini-B connector,
  • Easy mounting as little as four breadboard rows.
  • Connect to all of your existing software, like servo controller interface programs, through a USB port.
  • Compatible with USB 2.0 standards
  • Baud rates of up to 921.6 kbps.
  • Drivers are available for Windows 98 through Vista, Linux, and Mac OSX.

 

How to use Pololu USB-to-Serial Adapter

Use the GND, TX, and RX lines.

The TX and RX lines will tolerate up to 5.5 volts.

Product Specifications

 

PCB size: 1.0" x 0.65" including connector
USB standard: USB 2.0 (full speed)
Connector: USB mini-B
Data I/O voltage levels: 3.3 V (5 V tolerant)
Maximum data rate: 921.6 kbps
Supply current: 25 mA

 

Module pinout
 

 

PIN TYPE  FUNCTION
DCD In "Data carrier detect" control input (active low)
DTR Out "Data terminal ready" control output (active low)
(often used with DSR)
DSR In "Data set ready" control input (active low)
(often used with DTR)
RTS Out "Ready to send" control output
(often used with CTS)
CTS In "Clear to send" control input
(often used with RTS)
GND Power Ground
TX Out Asynchronous serial data transmit (idle high)
VBUS Power USB bus voltage (+5V)
RX In Asynchronous serial data receive
SUSPEND  Out Driven high when in USB suspend state
SUSPEND  Out Driven low when in USB suspend state
RST In Device reset
RI In "Ring indicator" control input (active low)
VDD Power  3.3 V voltage regulator output

 

Images

Ask a question

Back
Copyright © 2006 www.robotsinsearch.com