PBS-03JN

Manufacturer

SKU:

Hok-PBS

$1,407.37

  • Scanning angle(Detection area) is increased to 180°.
  • PBS-03JN works by scanning an LED of wavelength lambda = 880nm and the coordinates are calculated by measuring distance to object and its step angle. Obstacle is then detected in the setting area
  • Detection area can be set by PC(RS-232C).
  • Detection distance with 3 steps output for each area can be set.
  • Changeover for Max. 15 kinds of detection area set by PC can be made by outer bit input.

 

Hokuyo PBS-03JN Specifications

Model No Hokuyo PBS-03JN
Power source 24VDC(Allowable range 18 to 30VDC including ripple)
 
Current consumption 250mA or less(100mA or less when emission stops)
 
Except for I/O terminal current and rush current(500mA)
Light source
Infra-red LED
Detectable object and detection area
White paper with 300×300mm(Placed in parallel with sensor projection surface), 0.2 to 3m×2m(Origin point is scanning center position) but within scanning angle 180°
Area setting
Output 1
Output 2,3
Linear setting to progressive direction, fan-shaped setting to optical axis direction,
Percentage(%) setting against output 1 pointer
2 scanning mode

When each detecting area setting, it sets individually for each output.
Hysteresis
10% or less of detection distance(it is not getting 60mm or less)

 
Output Photo-coupler/NPN open-collector output(30VDC 50mA or less)
 
Output 1,2,3 : output OFF when detecting within area, trouble output : output ON when normal operation*
 
Input(Input 1 to 4) Photo-coupler input(Anode common, each input current 4mA or more), This can changes setting detection area.
 
Detecting area setting It set the area No. by Input 1, 2, 3 and 4
 
It stops the emission by getting all Input 1, 2, 3 and 4 to ON(OFF : H level input, ON : L level input)
 
Output response time 180msec or less(Scanning speed 1 rev./100msec)
 
280msec or less when 2 scanning mode(but except for 100msec, area changeover time)
 
Input response time Input taking-in cycle : 1 scanning time(100msec)
 
Lamps Power lamp(Green) : Flickered when trouble
 
Output 1, 2 and 3 lamp(Orange) : Lights up when detected in area
 
Connection Cable 1m long
 
Ambient illuminance(note) Halogen/mercury lamp : 10,000lx or less, Fluorescent lamp : 6,000lx or less
 
Ambient temperature/humidity -10 to +50 degrees C, 85%RH or less(Not condensing, not icing)
 
Vibration resistance 10 to 55Hz, double amplitude 1.5mm Each 2 hour in X, Y and Z directions
 
Impact resistance 490m/s2, Each 10 time in X, Y and Z directions
 
Protective structure IP64(IEC standard)
 
Life 5 years(motor life)
 
Materials Front case : Polycarbonate, rear case : ABS
 
Weight Approx. 500g