Motor Controllers

Brushed DC Motor Driver

  • Products: Brushed DC Motor Driver
$64.95
Pololu High-Power Motor Driver 36v20 CS discrete MOSFET H-bridge motor driver
  • Products: Brushed DC Motor Driver
$49.95
The Pololu High-Power Motor Driver 18v25 discrete MOSFET H-bridge motor driver E
  • Products: Brushed DC Motor Driver
$39.95
The Pololu High-Power Motor Driver 18v15 discrete MOSFET H-bridge motor driver e
  • Products: Brushed DC Motor Driver
$52.95
The Pololu High-Power Motor Driver 24v20 discrete MOSFET H-bridge motor driver e
  • Products: Brushed DC Motor Driver
$42.95
The Pololu High-Power Motor Driver 24v12 is a discrete MOSFET H-bridge motor dri
  • Products: Brushed DC Motor Driver
$54.95
Pololu High-Power Motor Driver 36v15 is a discrete MOSFET H-bridge motor driver enables
  • Products: Brushed DC Motor Driver
$17.95
This breakout board for Freescale MC33926 full H-bridge has an operating range of 5 to 28 V
  • Products: Brushed DC Motor Driver
$29.95
This dual brushed DC motor driver, based on Freescale MC33926 full H-bridge
  • Products: Brushed DC Motor Driver
$35.97
Drive two high-power motors through one compact unit, the dual VNH2SP30 motor driver carriers. Great for medium-sized, differential drive robot.
  • Products: Brushed DC Motor Driver
$29.97
Drive two high-power motors through one compact unit,
  • Products: Brushed DC Motor Driver
Works with Arduino boards.
  • Products: Brushed DC Motor Driver
$20.97
The board for ST VNH2SP30 motor driver IC operates from 5.5 to 16 V and can deliver a con
  • Products: Brushed DC Motor Driver
Pololu Dual MC33926 Motor Driver Shield for Arduino shield allows easy control of two brushed
  • Products: Brushed DC Motor Driver
$8.21
The VNH3SP30 is a great H-bridge motor driver for motors running from 6-16 V and drawing up to about 15 A.
  • Products: Brushed DC Motor Driver
$8.21
The VNH2SP30 is an improved version of the VNH3SP30 motor driver, featuring current sensing, increased drive capa
  • Products: Brushed DC Motor Driver
$7.95
Use Freescale’s MC33887 DC motor driver.
  • Products: Brushed DC Motor Driver
$18.80
 
  • Products: Brushed DC Motor Driver
$32.40
 
  • Products: Brushed DC Motor Driver
$24.00
 
  • Products: Brushed DC Motor Driver
$59.95
Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board.
  • Products: Brushed DC Motor Driver
$27.95
This carrier board for ST_s VNH3SP30 motor driver IC operates from 5.5 to 16 V and can deliver a continuous 9 A (30 A peak).
  • Products: Brushed DC Motor Driver
$6.95
This tiny breakout board for TI_s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors.
  • Products: Brushed DC Motor Driver
$5.95
This tiny breakout board for TI_s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added
  • Products: Brushed DC Motor Driver
$8.45
This tiny board is an easy way to use Toshiba_s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor.
  • Products: Brushed DC Motor Driver
$2.95
This TI SN754410 motor driver features two H-bridges that can be used for bidirectional control of two DC motors or to control a single stepper motor.
  • Products: Brushed DC Motor Driver
$3.49
The Sanyo LB1836M is a great low-voltage dual motor driver (dual H-bridge) that we use in our micro dual serial motor controller and original Orangutan robot controllers.
  • Products: Brushed DC Motor Driver
$59.95
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor.
  • Products: Brushed DC Motor Driver
$62.95
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor.
  • Products: Brushed DC Motor Driver
$44.95
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor.

Brushed DC Motor Controller

  • Products: Brushed DC Motor Controller
$25.00
Pololu 3A Motor Controller with Feedback with multiple interface and feedback options simplifies servo control of commonly available DC motors. The module
  • Products: Brushed DC Motor Controller
$74.95
This powerful motor controller allows variable speed and direction control of two large, brushed DC motors using a simple serial interface and provides several advanced features, such as motor acc
  • Products: Brushed DC Motor Controller
$24.95
This small, inexpensive motor controller allows variable speed and direction control of two small, brushed DC motors using a simple serial interface, making it easy to add motors to your microcont
  • Products: Brushed DC Motor Controller
$99.95
Pololu TReX Dual Motor Controller DMC01 blends RC, analog, and serial inputs for a powerful motor control solution capable of delivering a continuous 13 A per motor.
  • Products: Brushed DC Motor Controller
$59.95
Pololu TReX Jr Dual Motor Controller DMC02 lower-power, smaller, and lower-cost version of the TReX is the ultimate general-purpose motor controller for small motors.
  • Products: Brushed DC Motor Controller
$54.95
The Pololu Simple High-Power Motor Controller 24v23 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration
  • Products: Brushed DC Motor Controller
$54.95
Pololu Simple High-Power Motor Controller 18v25 makes basic control of brushed DC motors easy, with free Simple Motor Control Center software enabling quick configuration over USB
  • Products: Brushed DC Motor Controller
$35.95
Motor controller 24v12 to control DC Motorsfree Simple Motor Control Center software enabling quick configuration over USB.
  • Products: Brushed DC Motor Controller
$44.95
  • Products: Brushed DC Motor Controller
$94.95
  • Products: Brushed DC Motor Controller
$31.95
Frustrated by those cheap, low-voltage motors that require too much current? Here’s the answer: a low-voltage motor controller designed specifically for those toy motors.
  • Products: Brushed DC Motor Controller
$22.84
This tiny module can control two motors, 1 A peak each, and you can daisy-chain multiple units to control up to 62 motors with a single serial line.
  • Products: Brushed DC Motor Controller
$40.95
  • Products: Brushed DC Motor Controller
$34.95
  • Products: Brushed DC Motor Controller
$40.95
  • Products: Brushed DC Motor Controller
$30.95
  • Products: Brushed DC Motor Controller
$50.95
  • Products: Brushed DC Motor Controller
$30.95

Robot RC interface

  • Products: Robot RC interface
$19.95
This compact device serves as a four-channel multiplexer of hobby radio control pulses, allowing easy switching between two independent signal sources.
  • Products: Robot RC interface
$17.95
This compact device serves as a four-channel multiplexer of hobby radio control pulses, allowing easy switching between two independent signal sources.
  • Products: Robot RC interface
$5.95
This tiny board converts hobby radio control pulses to digital on/off signals for use in RC switch and simple RC adapter applications.

RC Servo Controllers

  • Products: RC Servo Controllers
$19.95
The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Products: RC Servo Controllers
$29.95
The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Products: RC Servo Controllers
$39.95
The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Products: RC Servo Controllers
$49.95
The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Products: RC Servo Controllers
$18.95
The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Products: RC Servo Controllers
$29.95
The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Products: RC Servo Controllers
$47.47
The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Products: RC Servo Controllers
$37.95
The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control.
  • Products: RC Servo Controllers
$19.95
At only 0.91" x 0.91", the Pololu micro serial servo controller is the smallest serial servo controller you’ll find.
  • Products: RC Servo Controllers
$17.95
This version of the micro serial servo controller is packaged as a partial kit in which the surface-mounted components are already assembled.
  • Products: RC Servo Controllers
$26.95
The Pololu serial 8-servo controller allows you to control up to eight RC servos with almost any robot controller or computer.
  • Products: RC Servo Controllers
$23.95
This version of the product is packaged as a partial kit in which the surface-mounted components are already assembled.
  • Products: RC Servo Controllers
$47.00
With our 16-servo controller, any microcontroller or computer can drive up to sixteen independent RC servos, using the same serial interface as our serial motor controllers.
  • Products: RC Servo Controllers
$16.95
This microcontroller is pre-programmed with our serial 8-servo controller firmware.This chip is a Microchip PIC16F628A microcontroller programmed with our serial 8-servo controller firmware.
  • Products: RC Servo Controllers
$26.95
This microcontroller is pre-programmed with our serial 16-servo controller firmware.
Syndicate content